Axitec solar panels reviews
Based on 6 ratings Aus Ranking
- 5 star 5
- 4 star 1
- 3 star 0
- 2 star 0
- 1 star 0
The views expressed by reviewers are theirs alone, and do not necessarily reflect those of Peacock Media Group, which makes no representations as to the accuracy of the reviews. For our full disclaimer and further information, see our Terms of Use and our Review Guidelines.
Axitec Energy GmbH & Co. KG has been on the solar manufacturing scene since 2001.The company's Australian subsidiary, Axitec Energy Australia Pty Ltd, was established in late 2019.
Australian Office Contact Details
Address: 213 Greenhill Road Eastwood SA 5063
Telephone: 0408 809 827
Email: [email protected]
Australian website
Company Info
Headquartered in Germany, Axitec solar panels destined for the Australian market are manufactured in China. However, the company is (very) keen to point out all research, development and engineering is carried out in Germany. Approximately 7 gigawatts of the company's panels have been installed world-wide as at late 2024. The company has production capacity of 2 GW annually.
Axitec Solar Panels In Australia
Prior to establishing the Australian subsidiary, Axitec solar panels were available here for quite some time - up until around mid-2017 when the Clean Energy Council delisted all Axitec modules due to "serious non-conformance" issues. But that's all water under the bridge, with the CEC subsequently and currently listing a dozen models as being approved for use here after those issues were sorted. Among Axitec modules suitable for rooftop applications:
TGBL/108WBA And 108BBA Series.
These glass/glass bifacial modules are available in 440 - 450W (front side) capacities. They use N-Type TOPCon cells and module conversion efficiency is up to 22.52%. They have a -0.31 %/°C temperature coefficient, measure 1762 x 1134 x 30 mm and weigh 21.6 kg. The 108BBA variant is an all-black panel.
Warranty Information
Axitec's glass-glass photovoltaic modules have a 30 year product warranty. There's also a 30-year linear performance warranty, stipulating a minimum 87.4% of nameplate capacity at the end of year 30.
If you have these modules installed on your rooftop, leave a review of Axitec solar panels here and share your thoughts on their quality and performance with other Australians who may be considering the brand for their installation.
Axitec Solar Panel Reviews
Bought From: Boschetti Show additional information
Bought From: Queensland Solar Power and Lighting Show additional information
Bought From: Solaworx Show additional information
So far pairing it with my Fronius Primo 4.0, it is working 101.5%@4060W compared to my Fronius Symo 5.0 at 100.8% @5040W. I am quite pleased with it.
Bought From: SOLARLAB Show additional information
Axitec has 2 solar panels in our database
| Model | Type | Size (W) | PTC (W) | Performance Ratio |
|---|---|---|---|---|
| AC-370MH/120VAU | Monocrystalline | 370 | N/A | 0.00 |
| AC-400MH/108VAU | Monocrystalline | 400 | N/A | 0.00 |