Solar Power Information - Wolvi, QLD, 4570
If you're considering installing solar panels for your Wolvi home (and/or a battery), this page offers useful related information and interesting statistics for Wolvi and the 4570 postcode area in Queensland.
If Wolvi isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 4570 Solar Power Statistics
In Wolvi's postcode area (4570), more than 14,089 small-scale systems have been installed with a collective capacity of 81,994 kW as at October 31, 2024.
Given a population of 42,720, this works out to 1,919 watts per person in the area, compared to a 1,034 watts Australian average. There are approximately 19,235 dwellings in the 4570 area, so that calculates out at 73 solar panel systems per 100 dwellings - the Australian average is 38.
Based on a conservative average of 356,793 kWh of energy production a day (enough to power the equivalent of 22,300 homes) and retail electricity costs of 30c per kilowatt-hour; Wolvi and 4570 postcode area residents are collectively generating $39,068,883 of energy at retail prices a year!
Wolvi solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 4570 region avoiding 104,184 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Wolvi?
The SolarQuotes free quoting service has been used by 24 households in Wolvi and 1596 households across the 4570 postcode area in Queensland.
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted QLD accredited installers we trust who service the Wolvi and 4570 area. Or continue reading for more useful information.
Solar Energy Resources In Wolvi
Wolvi experiences solar irradiation levels reaching approximately 5.19 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 4570 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Wolvi area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Wolvi in terms of annual solar energy output for the location, on average:
- 5kW system - 7,941 kWh (equivalent to ~136% of annual electricity consumption)
- 6kW system - 9,530 kWh (~163%)
- 10kW system - 15,883 kWh (~272%)
- 13kW system - 20,648 kWh (~354%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Wolvi, Queensland should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Wolvi's case, that is 26 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Queensland
As well as providing your home with electricity, Wolvi solar system installation owners can be paid for surplus energy generated. In QLD, feed-in tariffs generally currently range from 5c to 10c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 4570 area.
Wolvi Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 5c, Wolvi solar power system owners can expect to save $1,572 per year.
Gympie Regional Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the Gympie Regional Council area.
It's important to check with Gympie Regional Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Wolvi should visit this page.
Network Grid Connection Requirements In Queensland
A series of steps must be completed in Queensland involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Queensland.
Solar Panel Installers In Wolvi
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Wolvi. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Wolvi
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Wolvi home will depend on various factors.
We have solar battery installers within our network providing services to Wolvi who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Wolvi (or a home battery), feel free to contact us.
Wolvi Data Sources And Notes
Data sources used above for solar power information in Wolvi QLD 4570 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 4570 current as at October 31, 2024.
- Gympie Regional Council - Queensland
Some additional notes:
- Household electricity consumption in Wolvi is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Queensland average of 0.8kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Beenham Valley Rd , coordinates 26°11'3" S 152°49'15" E, around 1.2 km from the centre of Wolvi.