Solar Power Information - Tanby, QLD, 4703
If you're considering installing solar panels for your Tanby home (and/or a battery), this page offers useful related information and interesting statistics for Tanby and the 4703 postcode area in Queensland.
If Tanby isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 4703 Solar Power Statistics
In Tanby's postcode area (4703), more than 6,296 small-scale systems have been installed with a collective capacity of 34,995 kW as at September 30, 2024.
Given a population of 22,284, this works out to 1,570 watts per person in the area, compared to a 1,032 watts Australian average. There are approximately 10,442 dwellings in the 4703 area, so that calculates out at 60 solar panel systems per 100 dwellings - the Australian average is 38.
Based on a conservative average of 166,361 kWh of energy production a day (enough to power the equivalent of 10,398 homes) and retail electricity costs of 30c per kilowatt-hour; Tanby and 4703 postcode area residents are collectively generating $18,216,565 of energy at retail prices a year!
Tanby solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 4703 region avoiding 48,578 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Tanby?
The SolarQuotes free quoting service has been used by 19 households in Tanby and 634 households across the 4703 postcode area in Queensland.
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted QLD accredited installers we trust who service the Tanby and 4703 area. Or continue reading for more useful information.
Solar Energy Resources In Tanby
Tanby experiences solar irradiation levels reaching approximately 5.67 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 4703 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Tanby area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Tanby in terms of annual solar energy output for the location, on average:
- 5kW system - 8,676 kWh (equivalent to ~149% of annual electricity consumption)
- 6kW system - 10,411 kWh (~178%)
- 10kW system - 17,352 kWh (~297%)
- 13kW system - 22,557 kWh (~386%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Tanby, Queensland should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Tanby's case, that is 23 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Queensland
As well as providing your home with electricity, Tanby solar system installation owners can be paid for surplus energy generated. In regional QLD, feed-in tariffs are currently 13.4c per kilowatt-hour exported.
Tanby Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the fixed feed in tariff rate of 13.4c, Tanby solar power system owners can expect to save $2,295 per year.
Livingstone Shire Council Requirements.
At the time of publishing, there are special requirements involved with installing solar panels in the Livingstone Shire Council area. Circumstances where an approval is required are if the on-roof system will be installed on an existing building but the building is not assessed for load handling, and the installation will not be performed as per manufacturers specification and approved building plans.
It's important to check with Livingstone Shire Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Tanby should visit this page.
Network Grid Connection Requirements In Queensland
A series of steps must be completed in Queensland involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Queensland.
Solar Panel Installers In Tanby
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Tanby. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Tanby
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Tanby home will depend on various factors.
We have solar battery installers within our network providing services to Tanby who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Tanby (or a home battery), feel free to contact us.
Tanby Data Sources And Notes
Data sources used above for solar power information in Tanby QLD 4703 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 4703 current as at September 30, 2024.
- Livingstone Shire Council - Queensland
Some additional notes:
- Household electricity consumption in Tanby is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Queensland average of 0.8kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Emu Park Hill St , coordinates 23°15'57" S 150°49'24" E, around 8.7 km from the centre of Tanby.