Solar Power Information - Porky Flat, SA, 5222
If you're considering installing solar panels for your Porky Flat home (and/or a battery), this page offers useful related information and interesting statistics for Porky Flat and the 5222 postcode area in South Australia.
If Porky Flat isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 5222 Solar Power Statistics
In Porky Flat's postcode area (5222), more than 337 small-scale systems have been installed with a collective capacity of 1,708 kW as at September 30, 2024.
Given a population of 575, this works out to 2,970 watts per person in the area, compared to a 1,032 watts Australian average. There are approximately 658 dwellings in the 5222 area, so that calculates out at 51 solar panel systems per 100 dwellings - the Australian average is 38.
Based on a conservative average of 6,444 kWh of energy production a day (enough to power the equivalent of 403 homes) and retail electricity costs of 42c per kilowatt-hour; Porky Flat and 5222 postcode area residents are collectively generating $987,899 of energy at retail prices a year!
Porky Flat solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 5222 region avoiding 1,200 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Porky Flat?
The SolarQuotes free quoting service has been used by 1 households in Porky Flat and 59 households across the 5222 postcode area in South Australia.
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted SA accredited installers we trust who service the Porky Flat and 5222 area. Or continue reading for more useful information.
Solar Energy Resources In Porky Flat
Porky Flat experiences solar irradiation levels reaching approximately 4.5 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 5222 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Porky Flat area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Porky Flat in terms of annual solar energy output for the location, on average:
- 5kW system - 6,886 kWh (equivalent to ~118% of annual electricity consumption)
- 6kW system - 8,263 kWh (~141%)
- 10kW system - 13,771 kWh (~236%)
- 13kW system - 17,903 kWh (~307%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Porky Flat, South Australia should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Porky Flat's case, that is 35 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In South Australia
As well as providing your home with electricity, Porky Flat solar system installation owners can be paid for surplus energy generated. In SA, feed-in tariffs generally currently range from 5c to 10c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 5222 area.
Porky Flat Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 5c, Porky Flat solar power system owners can expect to save $1,800 per year.
Kangaroo Island Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the Kangaroo Island Council area.
It's important to check with Kangaroo Island Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Porky Flat should visit this page.
Network Grid Connection Requirements In South Australia
A series of steps must be completed in South Australia involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in South Australia.
Solar Panel Installers In Porky Flat
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Porky Flat. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Porky Flat
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Porky Flat home will depend on various factors.
We have solar battery installers within our network providing services to Porky Flat who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Porky Flat (or a home battery), feel free to contact us.
Porky Flat Data Sources And Notes
Data sources used above for solar power information in Porky Flat SA 5222 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 5222 current as at September 30, 2024.
- Kangaroo Island Council - South Australia
Some additional notes:
- Household electricity consumption in Porky Flat is based on the Australian average of 16kWh a day.
- Carbon intensity based on the South Australia average of 0.51kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Cape Willoughby , coordinates 35°50'33" S 138°7'58" E, around 8 km from the centre of Porky Flat.