Solar Power Information - Phillip, ACT, 2606
If you're considering installing solar panels for your Phillip home (and/or a battery), this page offers useful related information and interesting statistics for Phillip and the 2606 postcode area in Australian Captial Territory.
If Phillip isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 2606 Solar Power Statistics
In Phillip's postcode area (2606), more than 1,019 small-scale systems have been installed with a collective capacity of 7,772 kW as at September 30, 2024.
Given a population of 11,524, this works out to 674 watts per person in the area, compared to a 1,032 watts Australian average. There are approximately 5,887 dwellings in the 2606 area, so that calculates out at 17 solar panel systems per 100 dwellings - the Australian average is 38.
Based on a conservative average of 31,149 kWh of energy production a day (enough to power the equivalent of 1,947 homes) and retail electricity costs of 33c per kilowatt-hour; Phillip and 2606 postcode area residents are collectively generating $3,751,856 of energy at retail prices a year!
Phillip solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 2606 region avoiding 9,323 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Phillip?
The SolarQuotes free quoting service has been used by 46 households in Phillip and 277 households across the 2606 postcode area in Australian Captial Territory.
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted ACT accredited installers we trust who service the Phillip and 2606 area. Or continue reading for more useful information.
Solar Energy Resources In Phillip
Phillip experiences solar irradiation levels reaching approximately 4.78 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 2606 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Phillip area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Phillip in terms of annual solar energy output for the location, on average:
- 5kW system - 7,314 kWh (equivalent to ~125% of annual electricity consumption)
- 6kW system - 8,777 kWh (~150%)
- 10kW system - 14,628 kWh (~250%)
- 13kW system - 19,016 kWh (~326%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Phillip, Australian Captial Territory should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Phillip's case, that is 35 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Australian Captial Territory
As well as providing your home with electricity, Phillip solar system installation owners can be paid for surplus energy generated. In ACT, feed-in tariffs generally currently range from 6c to 10c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 2606 area.
Phillip Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 6c, Phillip solar power system owners can expect to save $1,622 per year.
Unincorporated Council Requirements.
At the time of publishing, there special requirements involved with installing solar panels in the Unincorporated Council area.
It's important to check with Unincorporated Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Phillip should visit this page.
Network Grid Connection Requirements In Australian Captial Territory
A series of steps must be completed in Australian Captial Territory involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Australian Captial Territory.
Solar Panel Installers In Phillip
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Phillip. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Phillip
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Phillip home will depend on various factors.
We have solar battery installers within our network providing services to Phillip who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Phillip (or a home battery), feel free to contact us.
Phillip Data Sources And Notes
Data sources used above for solar power information in Phillip ACT 2606 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 2606 current as at September 30, 2024.
- Unincorporated Council - Australian Captial Territory
Some additional notes:
- Household electricity consumption in Phillip is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Australian Captial Territory average of 0.82kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Mawson (Bernacchi St) , coordinates 35°21'44" S 149°5'50" E, around 1.3 km from the centre of Phillip.