Solar Power Information - Kingston, ACT, 2604
If you're considering installing solar panels for your Kingston home (and/or a battery), this page offers useful related information and interesting statistics for Kingston and the 2604 postcode area in Australian Captial Territory.
If Kingston isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 2604 Solar Power Statistics
In Kingston's postcode area (2604), more than 904 small-scale systems have been installed with a collective capacity of 6,292 kW as at September 30, 2024.
Given a population of 11,720, this works out to 537 watts per person in the area, compared to a 1,032 watts Australian average. There are approximately 6,400 dwellings in the 2604 area, so that calculates out at 14 solar panel systems per 100 dwellings - the Australian average is 38.
Based on a conservative average of 25,215 kWh of energy production a day (enough to power the equivalent of 1,576 homes) and retail electricity costs of 33c per kilowatt-hour; Kingston and 2604 postcode area residents are collectively generating $3,037,153 of energy at retail prices a year!
Kingston solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 2604 region avoiding 7,547 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Kingston?
The SolarQuotes free quoting service has been used by 25 households in Kingston and 229 households across the 2604 postcode area in Australian Captial Territory.
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted ACT accredited installers we trust who service the Kingston and 2604 area. Or continue reading for more useful information.
Solar Energy Resources In Kingston
Kingston experiences solar irradiation levels reaching approximately 4.78 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 2604 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Kingston area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Kingston in terms of annual solar energy output for the location, on average:
- 5kW system - 7,314 kWh (equivalent to ~125% of annual electricity consumption)
- 6kW system - 8,777 kWh (~150%)
- 10kW system - 14,628 kWh (~250%)
- 13kW system - 19,016 kWh (~326%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Kingston, Australian Captial Territory should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Kingston's case, that is 35 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Australian Captial Territory
As well as providing your home with electricity, Kingston solar system installation owners can be paid for surplus energy generated. In ACT, feed-in tariffs generally currently range from 6c to 10c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 2604 area.
Kingston Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 6c, Kingston solar power system owners can expect to save $1,622 per year.
Unincorporated Council Requirements.
At the time of publishing, there special requirements involved with installing solar panels in the Unincorporated Council area.
It's important to check with Unincorporated Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Kingston should visit this page.
Network Grid Connection Requirements In Australian Captial Territory
A series of steps must be completed in Australian Captial Territory involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Australian Captial Territory.
Solar Panel Installers In Kingston
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Kingston. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Kingston
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Kingston home will depend on various factors.
We have solar battery installers within our network providing services to Kingston who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Kingston (or a home battery), feel free to contact us.
Kingston Data Sources And Notes
Data sources used above for solar power information in Kingston ACT 2604 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 2604 current as at September 30, 2024.
- Unincorporated Council - Australian Captial Territory
Some additional notes:
- Household electricity consumption in Kingston is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Australian Captial Territory average of 0.82kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Manuka Oval , coordinates 35°18'60" S 149°8'3" E, around 687 metres from the centre of Kingston.