Solar Power Information - Brushy Creek, NSW, 2365

If you're considering installing solar panels for your Brushy Creek home (and/or a battery), this page offers useful related information and interesting statistics for Brushy Creek and the 2365 postcode area in New South Wales.

If Brushy Creek isn't your location, you can search for installation information relevant to your town or suburb here:

Postcode 2365 Solar Power Statistics

In Brushy Creek's postcode area (2365), more than 730 small-scale systems have been installed with a collective capacity of 4,924 kW as at October 31, 2024.

Given a population of 3,233, this works out to 1,523 watts per person in the area, compared to a 1,034 watts Australian average. There are approximately 1,643 dwellings in the 2365 area, so that calculates out at 44 solar panel systems per 100 dwellings - the Australian average is 38.

Based on a conservative average of 20,889 kWh of energy production a day (enough to power the equivalent of 1,306 homes) and retail electricity costs of 34c per kilowatt-hour; Brushy Creek and 2365 postcode area residents are collectively generating $2,592,333 of energy at retail prices a year!

Brushy Creek solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 2365 region avoiding 6,252 tonnes of carbon dioxide emissions annually.

Installing Solar Panels In Brushy Creek?

The SolarQuotes free quoting service has been used by 0 households in Brushy Creek and 129 households across the 2365 postcode area in New South Wales.

You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted NSW accredited installers we trust who service the Brushy Creek and 2365 area. Or continue reading for more useful information.

Solar Energy Resources In Brushy Creek

Brushy Creek experiences solar irradiation levels reaching approximately 5.06 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 2365 area per month.

Daily/Monthly System Energy Output Estimates

Here's what you can expect to generate with various sized solar power systems in the Brushy Creek area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.

Annual Electricity Output Estimates

Based on the above, the following is what you should be able to expect from a solar panel installation in Brushy Creek in terms of annual solar energy output for the location, on average:

  • 5kW system - 7,742 kWh (equivalent to ~133% of annual electricity consumption)
  • 6kW system - 9,291 kWh (~159%)
  • 10kW system - 15,485 kWh (~265%)
  • 13kW system - 20,130 kWh (~345%)

Optimal Panel Angle And Orientation

Rooftop solar panels installed in Brushy Creek, New South Wales should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Brushy Creek's case, that is 30 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).

Feed In Tariffs In New South Wales

As well as providing your home with electricity, Brushy Creek solar system installation owners can be paid for surplus energy generated. In NSW, feed-in tariffs generally currently range from 5c to 10c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 2365 area.

Brushy Creek Solar Energy Savings

Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 5c, Brushy Creek solar power system owners can expect to save $1,697 per year.

Armidale Regional Council Requirements.

At the time of publishing, there are special requirements involved with installing solar panels in the Armidale Regional Council area. Circumstances where approval is required include where the installation will impact the structural integrity of, or involve structural alterations to the building, or is not in a prescribed residential zone, or if the system protrudes more than 1.5m from the building, or if the system is greater than 10kW capacity. Approval will also be required if the land contains a State or local heritage item or is in a heritage conservation area if the system is attached to any wall or roof of a building facing a primary road and the system protrudes more than 0.5m from any building to which it is attached

It's important to check with Armidale Regional Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Brushy Creek should visit this page.

Network Grid Connection Requirements In New South Wales

A series of steps must be completed in New South Wales involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in New South Wales.

Solar Panel Installers In Brushy Creek

In our network we have quality, thoroughly pre-vetted solar power system installers servicing Brushy Creek. If you're ready to get quotes from installation professionals we know and trust:

Installing A Solar Battery In Brushy Creek

Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Brushy Creek home will depend on various factors. 

We have solar battery installers within our network providing services to Brushy Creek who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.

If you have any questions regarding choosing, buying and installing solar panels in Brushy Creek (or a home battery), feel free to contact us.

Brushy Creek Data Sources And Notes

Data sources used above for solar power information in Brushy Creek NSW 2365 include:

  • Census 2021 - Australian Bureau of Statistics
  • Bureau of Meteorology (BOM)
  • Clean Energy Regulator data for postcode 2365 current as at October 31, 2024.
  • Armidale Regional Council - New South Wales

Some additional notes:

  • Household electricity consumption in Brushy Creek is based on the Australian average of 16kWh a day.
  • Carbon intensity based on the New South Wales average of 0.82kg per kilowatt-hour.

Bureau of Meteorology details are based on your nearest weather station, which is Tenterden (Balook) , coordinates 30°5'12" S 151°23'27" E, around 11.7 km from the centre of Brushy Creek.

 To get your quotes, please enter your postcode: