Solar Power Information - Bradshaw, NT, 852
If you're considering installing solar panels for your Bradshaw home (and/or a battery), this page offers useful related information and interesting statistics for Bradshaw and the 852 postcode area in Northern Territory.
If Bradshaw isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 852 Solar Power Statistics
In Bradshaw's postcode area (852), more than 363 small-scale systems have been installed with a collective capacity of 4,489 kW as at September 30, 2024.
Given a population of 7,295, this works out to 615 watts per person in the area, compared to a 1,032 watts Australian average. There are approximately 2,037 dwellings in the 852 area, so that calculates out at 18 solar panel systems per 100 dwellings - the Australian average is 38.
Based on a conservative average of 23,298 kWh of energy production a day (enough to power the equivalent of 1,456 homes) and retail electricity costs of 26c per kilowatt-hour; Bradshaw and 852 postcode area residents are collectively generating $2,210,941 of energy at retail prices a year!
Bradshaw solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 852 region avoiding 5,442 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Bradshaw?
The SolarQuotes free quoting service has been used by 0 households in Bradshaw and 29 households across the 852 postcode area in Northern Territory.
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted NT accredited installers we trust who service the Bradshaw and 852 area. Or continue reading for more useful information.
Solar Energy Resources In Bradshaw
Bradshaw experiences solar irradiation levels reaching approximately 6.19 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 852 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Bradshaw area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Bradshaw in terms of annual solar energy output for the location, on average:
- 5kW system - 9,472 kWh (equivalent to ~162% of annual electricity consumption)
- 6kW system - 11,366 kWh (~195%)
- 10kW system - 18,943 kWh (~324%)
- 13kW system - 24,626 kWh (~422%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Bradshaw, Northern Territory should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Bradshaw's case, that is 14 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Northern Territory
As well as providing your home with electricity, Bradshaw solar system installation owners can be paid for surplus energy generated. In NT, feed-in tariffs generally currently range from 8c to 8c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 852 area.
Bradshaw Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 8c, Bradshaw solar power system owners can expect to save $1,900 per year.
Victoria Daly Regional Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the Victoria Daly Regional Council area.
It's important to check with Victoria Daly Regional Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Bradshaw should visit this page.
Network Grid Connection Requirements In Northern Territory
A series of steps must be completed in Northern Territory involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Northern Territory.
Solar Panel Installers In Bradshaw
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Bradshaw. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Bradshaw
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Bradshaw home will depend on various factors.
We have solar battery installers within our network providing services to Bradshaw who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Bradshaw (or a home battery), feel free to contact us.
Bradshaw Data Sources And Notes
Data sources used above for solar power information in Bradshaw NT 852 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 852 current as at September 30, 2024.
- Victoria Daly Regional Council - Northern Territory
Some additional notes:
- Household electricity consumption in Bradshaw is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Northern Territory average of 0.64kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Dorisvale , coordinates 14°29'58" S 131°20'48" E, around 47 km from the centre of Bradshaw.