Solar Power Information - Belair, SA, 5052

If you're considering installing solar panels for your Belair home (and/or a battery), this page offers useful related information and interesting statistics for Belair and the 5052 postcode area in South Australia.

If Belair isn't your location, you can search for installation information relevant to your town or suburb here:

Postcode 5052 Solar Power Statistics

In Belair's postcode area (5052), more than 1,460 small-scale systems have been installed with a collective capacity of 8,821 kW as at October 31, 2024.

Given a population of 6,378, this works out to 1,383 watts per person in the area, compared to a 1,034 watts Australian average. There are approximately 2,584 dwellings in the 5052 area, so that calculates out at 57 solar panel systems per 100 dwellings - the Australian average is 38.

Based on a conservative average of 35,350 kWh of energy production a day (enough to power the equivalent of 2,209 homes) and retail electricity costs of 42c per kilowatt-hour; Belair and 5052 postcode area residents are collectively generating $5,419,186 of energy at retail prices a year!

Belair solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 5052 region avoiding 6,580 tonnes of carbon dioxide emissions annually.

Installing Solar Panels In Belair?

The SolarQuotes free quoting service has been used by 283 households in Belair and 400 households across the 5052 postcode area in South Australia.

You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted SA accredited installers we trust who service the Belair and 5052 area. Or continue reading for more useful information.

Solar Energy Resources In Belair

Belair experiences solar irradiation levels reaching approximately 4.78 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 5052 area per month.

Daily/Monthly System Energy Output Estimates

Here's what you can expect to generate with various sized solar power systems in the Belair area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.

Annual Electricity Output Estimates

Based on the above, the following is what you should be able to expect from a solar panel installation in Belair in terms of annual solar energy output for the location, on average:

  • 5kW system - 7,314 kWh (equivalent to ~125% of annual electricity consumption)
  • 6kW system - 8,777 kWh (~150%)
  • 10kW system - 14,628 kWh (~250%)
  • 13kW system - 19,016 kWh (~326%)

Optimal Panel Angle And Orientation

Rooftop solar panels installed in Belair, South Australia should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Belair's case, that is 34 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).

Feed In Tariffs In South Australia

As well as providing your home with electricity, Belair solar system installation owners can be paid for surplus energy generated. In SA, feed-in tariffs generally currently range from 5c to 10c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 5052 area.

Belair Solar Energy Savings

Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 5c, Belair solar power system owners can expect to save $1,912 per year.

Mitcham City Council Requirements.

At the time of publishing, there are special requirements involved with installing solar panels in the Mitcham City Council area. Circumstances where an approval is required includes if the installation will be peformed in a state heritage place and the panels will be seen from ground level from a public street. Approval will also be needed if the total weight of panels exceeds 100 kg and the weight will not be distributed evenly, panels will overhang from the roof, panels will not be fitted parallel to the roof, with the underside surface of the panels being more than 100 mm above the surface of the roof.

It's important to check with Mitcham City Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Belair should visit this page.

Network Grid Connection Requirements In South Australia

A series of steps must be completed in South Australia involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in South Australia.

Solar Panel Installers In Belair

In our network we have quality, thoroughly pre-vetted solar power system installers servicing Belair. If you're ready to get quotes from installation professionals we know and trust:

Installing A Solar Battery In Belair

Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Belair home will depend on various factors. 

We have solar battery installers within our network providing services to Belair who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.

If you have any questions regarding choosing, buying and installing solar panels in Belair (or a home battery), feel free to contact us.

Belair Data Sources And Notes

Data sources used above for solar power information in Belair SA 5052 include:

  • Census 2021 - Australian Bureau of Statistics
  • Bureau of Meteorology (BOM)
  • Clean Energy Regulator data for postcode 5052 current as at October 31, 2024.
  • Mitcham City Council - South Australia

Some additional notes:

  • Household electricity consumption in Belair is based on the Australian average of 16kWh a day.
  • Carbon intensity based on the South Australia average of 0.51kg per kilowatt-hour.

Bureau of Meteorology details are based on your nearest weather station, which is St Johns , coordinates 35°0'4" S 138°37'12" E, around 410 metres from the centre of Belair.

 To get your quotes, please enter your postcode: