Solar Power Information - Bedford, WA, 6052
If you're considering installing solar panels for your Bedford home (and/or a battery), this page offers useful related information and interesting statistics for Bedford and the 6052 postcode area in Western Australia.
If Bedford isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 6052 Solar Power Statistics
In Bedford's postcode area (6052), more than 1,714 small-scale systems have been installed with a collective capacity of 9,089 kW as at October 31, 2024.
Given a population of 10,962, this works out to 829 watts per person in the area, compared to a 1,034 watts Australian average. There are approximately 5,045 dwellings in the 6052 area, so that calculates out at 34 solar panel systems per 100 dwellings - the Australian average is 38.
Based on a conservative average of 40,845 kWh of energy production a day (enough to power the equivalent of 2,553 homes) and retail electricity costs of 29c per kilowatt-hour; Bedford and 6052 postcode area residents are collectively generating $4,323,468 of energy at retail prices a year!
Bedford solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 6052 region avoiding 10,436 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Bedford?
The SolarQuotes free quoting service has been used by 180 households in Bedford and 370 households across the 6052 postcode area in Western Australia.
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted WA accredited installers we trust who service the Bedford and 6052 area. Or continue reading for more useful information.
Solar Energy Resources In Bedford
Bedford experiences solar irradiation levels reaching approximately 5.36 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 6052 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Bedford area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Bedford in terms of annual solar energy output for the location, on average:
- 5kW system - 8,202 kWh (equivalent to ~140% of annual electricity consumption)
- 6kW system - 9,842 kWh (~169%)
- 10kW system - 16,403 kWh (~281%)
- 13kW system - 21,324 kWh (~365%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Bedford, Western Australia should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Bedford's case, that is 31 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Western Australia
As well as providing your home with electricity, Bedford solar system installation owners can be paid for surplus energy generated. In WA, feed-in tariffs generally currently range from 3c to 10c per kilowatt-hour exported - so, it's important to compare energy retailers for the best electricity plan in the 6052 area.
Bedford Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the low end of the feed in tariff range rate of 3c, Bedford solar power system owners can expect to save $1,451 per year.
Bayswater City Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the Bayswater City Council area.
It's important to check with Bayswater City Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Bedford should visit this page.
Network Grid Connection Requirements In Western Australia
A series of steps must be completed in Western Australia involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Western Australia.
Solar Panel Installers In Bedford
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Bedford. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Bedford
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Bedford home will depend on various factors.
We have solar battery installers within our network providing services to Bedford who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Bedford (or a home battery), feel free to contact us.
Bedford Data Sources And Notes
Data sources used above for solar power information in Bedford WA 6052 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 6052 current as at October 31, 2024.
- Bayswater City Council - Western Australia
Some additional notes:
- Household electricity consumption in Bedford is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Western Australia average of 0.7kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Perth Metro , coordinates 31°55'9" S 115°52'22" E, around 2.1 km from the centre of Bedford.