Solar Power Information - Barker Creek Flat, QLD, 4615
If you're considering installing solar panels for your Barker Creek Flat home (and/or a battery), this page offers useful related information and interesting statistics for Barker Creek Flat and the 4615 postcode area in Queensland.
If Barker Creek Flat isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 4615 Solar Power Statistics
In Barker Creek Flat's postcode area (4615), more than 1,982 small-scale systems have been installed with a collective capacity of 9,800 kW as at October 31, 2024.
Given a population of 6,382, this works out to 1,536 watts per person in the area, compared to a 1,034 watts Australian average. There are approximately 3,311 dwellings in the 4615 area, so that calculates out at 60 solar panel systems per 100 dwellings - the Australian average is 38.
Based on a conservative average of 43,139 kWh of energy production a day (enough to power the equivalent of 2,696 homes) and retail electricity costs of 30c per kilowatt-hour; Barker Creek Flat and 4615 postcode area residents are collectively generating $4,723,669 of energy at retail prices a year!
Barker Creek Flat solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 4615 region avoiding 12,596 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Barker Creek Flat?
The SolarQuotes free quoting service has been used by 2 households in Barker Creek Flat and 251 households across the 4615 postcode area in Queensland.
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted QLD accredited installers we trust who service the Barker Creek Flat and 4615 area. Or continue reading for more useful information.
Solar Energy Resources In Barker Creek Flat
Barker Creek Flat experiences solar irradiation levels reaching approximately 5.25 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 4615 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Barker Creek Flat area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Barker Creek Flat in terms of annual solar energy output for the location, on average:
- 5kW system - 8,033 kWh (equivalent to ~138% of annual electricity consumption)
- 6kW system - 9,640 kWh (~165%)
- 10kW system - 16,066 kWh (~275%)
- 13kW system - 20,886 kWh (~358%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Barker Creek Flat, Queensland should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Barker Creek Flat's case, that is 26 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Queensland
As well as providing your home with electricity, Barker Creek Flat solar system installation owners can be paid for surplus energy generated. In regional QLD, feed-in tariffs are currently 13.4c per kilowatt-hour exported.
Barker Creek Flat Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the fixed feed in tariff rate of 13.4c, Barker Creek Flat solar power system owners can expect to save $2,125 per year.
South Burnett Regional Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the South Burnett Regional Council area.
It's important to check with South Burnett Regional Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Barker Creek Flat should visit this page.
Network Grid Connection Requirements In Queensland
A series of steps must be completed in Queensland involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Queensland.
Solar Panel Installers In Barker Creek Flat
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Barker Creek Flat. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Barker Creek Flat
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Barker Creek Flat home will depend on various factors.
We have solar battery installers within our network providing services to Barker Creek Flat who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Barker Creek Flat (or a home battery), feel free to contact us.
Barker Creek Flat Data Sources And Notes
Data sources used above for solar power information in Barker Creek Flat QLD 4615 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 4615 current as at October 31, 2024.
- South Burnett Regional Council - Queensland
Some additional notes:
- Household electricity consumption in Barker Creek Flat is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Queensland average of 0.8kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Embreys Bridge , coordinates 26°38'25" S 151°56'35" E, around 141 metres from the centre of Barker Creek Flat.