Solar Power Information - Ambrose, QLD, 4695
If you're considering installing solar panels for your Ambrose home (and/or a battery), this page offers useful related information and interesting statistics for Ambrose and the 4695 postcode area in Queensland.
If Ambrose isn't your location, you can search for installation information relevant to your town or suburb here:
Postcode 4695 Solar Power Statistics
In Ambrose's postcode area (4695), more than 287 small-scale systems have been installed with a collective capacity of 1,534 kW as at September 30, 2024.
Given a population of 983, this works out to 1,561 watts per person in the area, compared to a 1,032 watts Australian average. There are approximately 439 dwellings in the 4695 area, so that calculates out at 65 solar panel systems per 100 dwellings - the Australian average is 38.
Based on a conservative average of 6,896 kWh of energy production a day (enough to power the equivalent of 431 homes) and retail electricity costs of 30c per kilowatt-hour; Ambrose and 4695 postcode area residents are collectively generating $755,057 of energy at retail prices a year!
Ambrose solar power system owners are also contributing to greenhouse gas emission reduction, with the systems in 4695 region avoiding 2,013 tonnes of carbon dioxide emissions annually.
Installing Solar Panels In Ambrose?
The SolarQuotes free quoting service has been used by 5 households in Ambrose and 30 households across the 4695 postcode area in Queensland.
You can join them! To get started, simply click the button below and we'll match you to up to 3 pre-vetted QLD accredited installers we trust who service the Ambrose and 4695 area. Or continue reading for more useful information.
Solar Energy Resources In Ambrose
Ambrose experiences solar irradiation levels reaching approximately 5.36 kilowatt-hours per square metre per day on average over a year. The following graph shows solar irradiation/output levels per kilowatt of installed solar panels in the 4695 area per month.
Daily/Monthly System Energy Output Estimates
Here's what you can expect to generate with various sized solar power systems in the Ambrose area, assuming good quality components, a suitable rooftop and professional, accredited solar installation.
Annual Electricity Output Estimates
Based on the above, the following is what you should be able to expect from a solar panel installation in Ambrose in terms of annual solar energy output for the location, on average:
- 5kW system - 8,202 kWh (equivalent to ~140% of annual electricity consumption)
- 6kW system - 9,842 kWh (~169%)
- 10kW system - 16,403 kWh (~281%)
- 13kW system - 21,324 kWh (~365%)
Optimal Panel Angle And Orientation
Rooftop solar panels installed in Ambrose, Queensland should generally face North for the best results. For a good panel angle, the general rule of thumb is it should be around the same as latitude. In Ambrose's case, that is 23 degrees - but usually whatever your rooftop angle is will be fine (unless it's under 10 degrees - then tilt frames may be needed).
Feed In Tariffs In Queensland
As well as providing your home with electricity, Ambrose solar system installation owners can be paid for surplus energy generated. In regional QLD, feed-in tariffs are currently 13.4c per kilowatt-hour exported.
Ambrose Solar Energy Savings
Based on a 6.6kW system installation, a self-consumption rate of 40% and the fixed feed in tariff rate of 13.4c, Ambrose solar power system owners can expect to save $2,170 per year.
Gladstone Regional Council Requirements.
At the time of publishing, there do not appear to be any special requirements involved with installing solar panels in the Gladstone Regional Council area.
It's important to check with Gladstone Regional Council regarding any potential changes before proceeding with installation. For further information, prospective solar owners in Ambrose should visit this page.
Network Grid Connection Requirements In Queensland
A series of steps must be completed in Queensland involving you, your network distributor and your installer - but your installer will do most of the administrative heavy lifting. Learn more about the grid connection process in Queensland.
Solar Panel Installers In Ambrose
In our network we have quality, thoroughly pre-vetted solar power system installers servicing Ambrose. If you're ready to get quotes from installation professionals we know and trust:
Installing A Solar Battery In Ambrose
Households across Australia are increasingly thinking of installing a home battery; either as an addition/upgrade to an existing PV system, or installed concurrently with solar panels. Whether batteries will make sense for your Ambrose home will depend on various factors.
We have solar battery installers within our network providing services to Ambrose who can advise you on home energy storage as a retrofit upgrade or part of a full solar + battery system installation - and provide a quote.
If you have any questions regarding choosing, buying and installing solar panels in Ambrose (or a home battery), feel free to contact us.
Ambrose Data Sources And Notes
Data sources used above for solar power information in Ambrose QLD 4695 include:
- Census 2021 - Australian Bureau of Statistics
- Bureau of Meteorology (BOM)
- Clean Energy Regulator data for postcode 4695 current as at September 30, 2024.
- Gladstone Regional Council - Queensland
Some additional notes:
- Household electricity consumption in Ambrose is based on the Australian average of 16kWh a day.
- Carbon intensity based on the Queensland average of 0.8kg per kilowatt-hour.
Bureau of Meteorology details are based on your nearest weather station, which is Darts Creek , coordinates 23°44'39" S 150°56'12" E, around 4.7 km from the centre of Ambrose.